Napco Security Technologies GEM-K2AS Bedienungsanleitung Seite 25
- Seite / 36
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
25
PROGRAMMING (OPTIONAL)
Introduction
The Program Mode (optional) is used to
customize User Codes. Access to the
Program Mode requires a special User
Code, therefore not all users may have
the ability to program.
Notes:
1. If the system contains more than one
keypad, only the keypad designated
“No. 1” may be used for programming
(if in doubt which is No. 1, ask your
installer).
2. Operation of the keypad buttons in
the Program Mode is different from
that for normal operation. Refer to the
accompanying diagram for keypad
functions in the Program Mode.
3. If the selected function requires more
than one screen, scroll the display
using
R.
4. While in the Program Mode, the
ARMED and STATUS lights remain
off and burglar and fire alarm func-
tions are disabled.
5. If the keypad detects no activity in the
Program Mode for more than 4 min-
utes, a tone will sound; to silence the
tone, press the blue
G button.
6. The programmed code or description
will not be permanently stored until
you press
U
.
7. To exit the Program Mode, press
C
.
Programming User Codes
Do not attempt to program a code contain-
ing any blank spaces between digits. In
selecting your codes, do not program re-
petitive numbers (1111), consecutive
numbers (1234), your birth date, address,
or other obvious combinations. Choose a
code of up to six digits (a minimum of four
is recommended, and required in UL in-
stallations). Note: Duplicate Codes are
not allowed; therefore a duplicate Code en-
tered in the LCD Window will erase when
U
is pressed.
The User Program Mode is accessed from
the Function Mode as follows:
1. Enter your code, then press
R
to
enter Function Mode.
2. Answer NO (press
Q) until
"TurnOn Prog Yes/No" is displayed,
then press the YES button (
P).
"User01" will display.
Note: If you pass "TurnOn Prog", press
B to scroll back.
3. Using the number buttons, enter a
User Number as a two-digit number
(enter 1-9 as "01" - "09").
4. Press R. The cursor will advance
to the User Code screen and read the
existing code, if any.
(continued)
- OPERATING GUIDE for your 1
- INTRODUCTION 2
- TABLE OF CONTENTS 3
- PRIOR / NO 4
- NEXT / YES 4
- P when the 5
- BYPASSED 6
- Area Arming (Optional) 8
- Manager's Mode 8
- Global Arming 8
- Easy Exit 9
- Instant Protection 10
- Emergency Buttons 10
- FIRE PROTECTION 13
- FUNCTION MENU 17
- CENTRAL STATION MONITORING 22
- ADVANCED FEATURES 23
- G button 25
- G 0, then 26
- G, 0 to clear 26
- PROGRAMMING (OPTIONAL) 27
- KEYPAD MESSAGES 28
- GLOSSARY 32
- SYSTEM TROUBLE ERROR CODES 35
- NAPCO LIMITED WARRANTY 36
Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Napco Security Technologies GEM-K2AS
Sicherheitszugriffskontrollsysteme Napco Security Technologies GEMINI GEM-P400 Bedienungsanleitung
(16 Seiten)
(16 Seiten)
Sicherheitszugriffskontrollsysteme Napco Security Technologies GEM-P1632 Bedienungsanleitung
(16 Seiten)
(16 Seiten)
Sicherheitszugriffskontrollsysteme Napco Security Technologies GEM-DXRP2 Bedienungsanleitung
(36 Seiten)
(36 Seiten)
Sicherheitszugriffskontrollsysteme Napco Security Technologies XP-400 Bedienungsanleitung
(28 Seiten)
(28 Seiten)
Sicherheitszugriffskontrollsysteme Napco Security Technologies GEM-DXK3 Bedienungsanleitung
(32 Seiten)
(32 Seiten)
Sicherheitszugriffskontrollsysteme Napco Security Technologies GEM-K1CA Bedienungsanleitung
(40 Seiten)
(40 Seiten)
Motorola digital cellular phone Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Mobiltelefone Motorola digital cellular phone.
Wir stellen 1 PDF-Handbücher Motorola digital cellular phone zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Technical Information
Kommentare zu diesen Handbüchern